The requirements of Occupational Safety and Health Standard 1910.157 apply to the placement, use, maintenance, and testing of portable fire extinguishers provided for the use of employees. Where extinguishers are provided but are not intended for employee use and the employer has both an emergency action plan and a fire prevention plan that meet the requirements of 29 CFR 1910.38 and 29 CFR 1910.39 respectively, then only the requirements of paragraphs 1910.157(e) and 1910.157(f) apply.
This series of articles will provide a summary of each section of Occupational Safety and Health Standard 1910.157 to allow the reader a good understanding of the requirements as they apply to portable fire extinguishers in the workplace. Occupational Safety and Health Standard 1910.157 consists of 6 major section:
- 1910.157(b) – Exemptions
- 1910.157(c) – General Requirements
- 1910.157(d) – Selection and Distribution
- 1910.157(e) – Inspection, Maintenance and Testing
- 1910.157(f) – Hydrostatic Testing
- 1910.157(g) – Training and Education
Part 1 in this series addressed Exemptions to the requirements of Occupational Safety and Health Standard 1910.157. Part 2 in this series will address General Requirements of Occupational Safety and Health Standard 1910.157.
1910.157(c) – General Requirements of Occupational Safety and Health Standard 1910.157
Employers shall provide portable fire extinguishers and shall mount, locate and identify them so that they are readily accessible to employees without subjecting the employees to possible injury. Only approved portable fire extinguishers shall be used. Employers shall not provide or make available in the workplace portable fire extinguishers using carbon tetrachloride or chlorobromomethane extinguishing agents. Employers shall assure that portable fire extinguishers are maintained in a fully charged and operable condition and kept in their designated places at all times except during use. Employers shall remove from service all soldered or riveted shell self-generating soda acid or self-generating foam or gas cartridge water type portable fire extinguishers which are operated by inverting the extinguisher to rupture the cartridge or to initiate an uncontrollable pressure generating chemical reaction to expel the agent.
Contact Jasperwood Fire Equipment Company Today
Jasperwood Fire Equipment Company has been providing fire equipment sales and service to the Texas Panhandle since 1953. Jasperwood Fire Equipment Company provides complete fire protection services for restaurants, commercial kitchens and other industries in the Texas Panhandle including Plainview TX, Amarillo TX and Lubbock TX as well as the surrounding areas. Jasperwood Fire Equipment Company is your best solution for all fire protection and fire suppression system products and services. Don’t gamble with the safety of your business, your employees, your valuable assets or your guests.
Request Information, Service, Training Or A Quote or call Jasperwood Fire Equipment Company TODAY. In Amarillo TX call (806) 373-0000, in Lubbock TX call (806) 793-3000 and in Plainview TX call (806) 296-9789.