Jasperwood Fire Equipment Company is an authorized dealer for AMEREX fire equipment including the AMEREX lines of Fire Extinguishers. AMEREX handheld portable fire extinguishers have been the industry standard for 50 years. With any of the AMEREX products from Jasperwood Fire Equipment Company you can be sure you are receiving the best quality products available.
All AMEREX handheld portable fire extinguishers comply with the recommendations of the National FireProtection Association and are tested and rated by Underwriters Laboratories or FMGlobal to ANSI / UL Standards. All fire extinguisher nameplates contain the necessary information to comply with national and local OSHA requirements.
AMEREX handheld portable fire extinguishers from Jasperwood Fire Equipment Company offer longer life, lower cost and the best warranty in the industry.
AMEREX manufactures an extensive variety of hand-portable and wheeled fire extinguishers, both “compliance” (code required) and “specialty” types. “Compliance” extinguishers are designed to meet and exceed state or local fire protection requirements. “Specialty”extinguishers are intended for use on particular types of hazards. The most current issue of NFPA-10 should be consulted for minimum recommended fire extinguisher types, placement, and travel distances. As your local AMEREX Fire Equipment Distributor, Jasperwood Fire Equipment Company is professionally equipped to help you evaluate and implement these recommendations.
All AMEREX handheld portable fire extinguishers are furnished with a detailed “OwnersManual” containing valuable information. The manual contains information on the installation, use, and maintenance of the extinguisher. The fire extinguisher nameplate contains specific information on “HOW TO USE” the particular extinguisher.The label instructions vary slightly according to type and size. All potential operators should be totally familiar with the instructions on any extinguisher they might be required to use.
AMEREX handheld portable fire extinguishers are designed and manufactured to meet the fire protection needs of a wide variety of applications, including:
- Transportation - ABC Dry Chemical—All varieties (OEM, Up-fitters, Aftermarket)
- Education - Aluminum Valve Dry Chemical, Clean Agent, K class, Water Mist, CO2, Restaurant Systems
- Chemical - Brass Valve Dry Chemical, Z-Series, Wheeled
- Distribution Centers - 4 Brass Valve Dry Chemical, Z-Series, Wheeled
- Healthcare - Aluminum Valve Dry Chemical, CO2, Clean Agent, K Class, Water Mist, Wheeled
- Industrial
- Light: Aluminum Valve Dry Chemical, Clean Agent, CO2, Class D
- Medium: Aluminum Valve Dry Chemical, Clean Agent, CO2, Class D
- Heavy: Brass Valve Dry Chemical, Dry Chemical, Z-Series Class D, Wheeled
- Oil and Gas - Brass Valve Dry Chemical, Z-Series, Wheeled
The line of AMEREX handheld portable fire extinguishers offered by Jasperwood Fire Equipment Company includes:
- AMEREX Water Handheld Portable Fire Extinguishers (READ MORE)
- AMEREX Wet Chemical Handheld Portable Fire Extinguishers (READ MORE)
- AMEREX Water Mist Handheld Portable Fire Extinguishers (READ MORE)
- AMEREX Halotron BrX™ (2-BTP) Handheld Portable Fire Extinguishers (READ MORE)
- AMEREX Halotron™ 1 Handheld Portable Fire Extinguishers (READ MORE)
- AMEREX Halon 1211 Handheld Portable Fire Extinguishers (READ MORE)
- AMEREX Carbon Dioxide Handheld Portable Fire Extinguishers (READ MORE)
- AMEREX Class D Handheld Portable Fire Extinguishers (READ MORE)
- AMEREX ABC Dry Chemical Handheld Portable Fire Extinguishers (READ MORE)
- AMEREX Regular Dry Chemical Handheld Portable Fire Extinguishers (READ MORE)
- AMEREX Purple K Dry Chemical Handheld Portable Fire Extinguishers (READ MORE)
- AMEREX Z-Series High Performance Handheld Portable Fire Extinguishers (READ MORE)
- AMEREX High Flow Dry Chemical Handheld Portable Fire Extinguishers (READ MORE)
CLICK HERE TO REQUEST INFORMATION, SERVICE, TRAINING OR A QUOTE or call Jasperwood Fire Equipment Company in Amarillo TX at (806) 373-0000, in Lubbock TX at (806) 793-3000 or in Plainview TX at (806) 296-9789.
AMEREX Water Handheld Portable Fire Extinguisher Model 240 utilizes the cooling, soaking, and penetrating effect of a 45-55 foot stream of WATER. The 55-second discharge time makes it very effective for inexperienced operators for use on Class A fires.
Features of AMEREX Water Handheld Portable Fire Extinguishers
- 5-Year Manufacturer’s Warranty
- Stored Pressure Design
- Polished Stainless-Steel Cylinders
- All Stainless Steel Valve Construction
- Exclusive Crevice-Free, Butt Welded Cylinder
- Temperature Range +40°F to 120°F
- Maximum Visibility During Discharge
- Large Loop Stainless Steel Pull Pin
- QR Coded and Bilingual Labels
- Model 506B Antifreeze Charge
- The Model 240 may be freeze protected to -40ºF by adding a Model 506B Charge
CLICK HERE TO REQUEST INFORMATION, SERVICE, TRAINING OR A QUOTE or call Jasperwood Fire Equipment Company in Amarillo TX at (806) 373-0000, in Lubbock TX at (806) 793-3000 or in Plainview TX at (806) 296-9789.
AMEREX Wet Chemical Handheld Portable Fire Extinguishers are the best restaurant kitchen appliance hand-portable fire extinguishers you can purchase. Each model utilizes a specially blended potassium acetate base agent and has been tested and approved by UL for restaurant kitchen hazards. The recent trend to more efficient cooking appliances and use of vegetable-based cooking oils dictates the use of a hand-portable fire extinguisher with greater fire-fighting capacity and cooling effect to combat these very hot and difficult fires. Available in two sizes; 6 liter or 2½ gallon–with attractive stainless-steel cylinders and easy-to-use hose-and-spray application nozzle. The superior fire-fighting capability of the Wet Chemical agent is placed exactly where you aim it with no dry chemical residue to clean up. The Models B260 and B262 are the ideal “KITCHEN USE” fire extinguishers. They supplement existing cooking equipment automatic system protection for an extra margin of safety.
Features of AMEREX Wet Chemical Handheld Portable Fire Extinguishers
- 5-Year Manufacturer’s Warranty
- Stored Pressure Design
- Polished Stainless-Steel Cylinders
- USCG Models have Durable High- Gloss Polyester Powder Paint Coating
- All Stainless-Steel Valve Construction
- Exclusive Crevice-Free, Butt-Welded Cylinder
- Tested on Commercial Deep Fat Fryers to ANSI/UL711 Test Protocol and Safe to Use on Energized Electrical Appliances
- Class 2A Rated to Meet Fire Code Occupancy Hazard Requirements
- Temperature Range +40°F to 120°F
- Factory Charged
- Large Loop Stainless-Steel Pull Pin
- Swivel Connection on Hose Allows Nozzle to be Oriented for Proper Use
- Nozzle Grip Design with 45° Angle for Easy “Overhead” Application
- Agent Discharged as a Fine Mist– Helps Prevent Grease Splash and Re-flash While Cooling the Appliance
- Precise Extinguishing Agent Application
- QR Coded and Bilingual Labels
- Models B260G and B262G are USCG Approved
- Excellent for use on all cooking appliances including solid fuel char broilers
CLICK HERE TO REQUEST INFORMATION, SERVICE, TRAINING OR A QUOTE or call Jasperwood Fire Equipment Company in Amarillo TX at (806) 373-0000, in Lubbock TX at (806) 793-3000 or in Plainview TX at (806) 296-9789.
AMEREX Water Mist Handheld Portable Fire Extinguishers are the ultimate extinguisher for Class A fires and for locations where a potential Class C (electrical) hazard exists. The fine spray from the unique misting nozzle provides safety from electrical shock, greatly enhances the cooling and soaking characteristics of the agent, and reduces scattering of burning materials. The AMEREX Water Mist extinguishers contain deionized water (sold separately) making them the best extinguishers for protection of hospital environments, telecommunication facilities, and “clean room” manufacturing facilities. The AMEREX Water Mist extinguishers are easy to use, maintain, and service.
Features of AMEREX Water Mist Handheld Portable Fire Extinguishers
- 5-Year Manufacturer’s Warranty
- Stored Pressure Design
- Stainless-Steel Cylinders
- Durable High-Gloss Polyester Powder Paint
- All-Metal Valve Construction
- Exclusive Crevice-Free, Butt-Welded Cylinder
- Temperature Range +40°F to 120°F
- Wand Provides Greatest Operator Safety
- Large Loop Stainless-Steel Pull Pin
- Maximum Visibility During Discharge
- No Electrical Conductivity Back to the Operator
- No Thermal or Static Shock
- Minimal Training–Simplest to use
- Most Economical Agent Available
- QR Coded and Bilingual Labels
- Non-magnetic Construction Tested by an Independent Agency for use in MRI Facilities to 11.7 Tesla (including wall hanger bracket)
- Non-toxic–Causes no Respiratory Problems
- 2-pack Charges 670 and 671 Deionized Water Extinguishing Agent Sold Separately
- Sanitary and Easy-to-Clean White Paint Finish
- No Powder Residue
- Recommended for Lithium-Ion Battery Fires
- Tested to 11.7 Tesla
CLICK HERE TO REQUEST INFORMATION, SERVICE, TRAINING OR A QUOTE or call Jasperwood Fire Equipment Company in Amarillo TX at (806) 373-0000, in Lubbock TX at (806) 793-3000 or in Plainview TX at (806) 296-9789.
AMEREX Halotron BrX™ (2-BTP) Handheld Portable Fire Extinguishers provide a unique solution for Halon 1211 replacement. The model 349 extinguisher utilizes Halotron BrX™ to fulfill the next generation of aviation extinguisher requirements. BrX is a low GWP and very low ODP clean agent approved for use on commercial aircraft. The AMEREX model 349 is constructed of a lightweight aluminum valve assembly and cylinder. The hose provides the operator greater flexibility for utilization in tight spaces. AMEREX is the solution for all of your portable extinguisher needs.
Features of AMEREX Halotron BrX™ (2-BTP) Handheld Portable Fire Extinguishers
- 6-Year Manufacturer’s Warranty
- Stored Pressure Design
- Aluminum Cylinder
- Durable High-Gloss Polyester Powder Paint
- All-Metal Valve Construction
- Hose is Unique to AMEREX Product (Model 349)
- Extinguisher is Serviceable in Accordance With NFPA 10
- Hose Provides Greater Access to Tight Spaces–Offering Greater Flexibility When Using the Extinguisher (Model 349)
- Temperature range: -40ºF to 120ºF/-40ºC to 49ºC
- Maximum Visibility During Discharge
- Large Loop Pull Pin
- No Electrical Conductivity Back to the Operator
- No Thermal or Static Shock
- QR Coded and Bilingual Labels
- Leaves No Residue
- Approved for Aircraft Only
- Low GWP and very low ODP clean agent
CLICK HERE TO REQUEST INFORMATION, SERVICE, TRAINING OR A QUOTE or call Jasperwood Fire Equipment Company in Amarillo TX at (806) 373-0000, in Lubbock TX at (806) 793-3000 or in Plainview TX at (806) 296-9789.
AMEREX Halotron™ I Handheld Portable Fire Extinguishers clean fire extinguishing agent discharges as a rapidly evaporating liquid, which is non-conductive, non-corrosive, and leaves behind no residue. Halotron™ I is the clean agent market leader with a history of successful real-world protection of valuable assets. From model-scale aircraft to wide-body commercial aircraft, from data centers to pharmaceutical and other industrial plants, the Halotron™ I agent has been used to extinguish the fire, limit damage, and help reduce downtime that can be caused by other Agents. Applications for these extinguishers include: data centers, laboratories, manufacturing plants, general office areas, computer rooms, telecommunication facilities, clean rooms, control rooms, warehouses, military electronics, vehicles including classic autos, boats, engine compartments, aircraft ramps, on-board aircraft, and in facilities that service aircraft and any facility where dry chemical extinguishers could cause unacceptable damage or contamination.
Features of AMEREX Halotron™ I Handheld Portable Fire Extinguishers
- 6-Year Manufacturer’s Warranty
- Stored Pressure Design
- Dependable Drawn-Steel Cylinders
- Durable High-Gloss Polyester Powder Paint
- All-Metal Valve Construction
- Temperature Range -40°F to 120°F
- Maximum Visibility During Discharge
- Large Loop Pull Pin
- No Electrical Conductivity Back to the Operator
- No Thermal or Static Shock
- QR Coded and Bilingual Labels
- EPA approved “Clean Agent” for Class A, B and C hazards
- Low GWP (Global Warming Potential) 0.0098, CFC-11=1.0 Low ODP (Ozone Depletion Potential)–77,100 yr. CO2 time horizon
- Short Atmospheric Lifetime
- 5 lb. (B386T), 11 lb., and 15½ lb.
- Extinguishers are USCG Approved With Bracket Listed on UL Label
- Chrome Cylinders
- Leaves No Residue
- FAA Approved Models Available
CLICK HERE TO REQUEST INFORMATION, SERVICE, TRAINING OR A QUOTE or call Jasperwood Fire Equipment Company in Amarillo TX at (806) 373-0000, in Lubbock TX at (806) 793-3000 or in Plainview TX at (806) 296-9789.
In AMEREX Halon 1211 Handheld Portable Fire Extinguishers the HALON 1211 is a liquefied gas, pressurized with nitrogen, which discharges as a vapor causing no cold or static shock and no impairment of the operator’s vision. This “CLEAN” agent quickly penetrates difficult-to-see and hard-to-reach areas and leaves no residue. It is recommended for protection of delicate, sensitive, and expensive computers, electrical equipment, tapes and film, automotive and aircraft engines, laboratory chemicals and equipment.
Features of AMEREX Halon 1211 Handheld Portable Fire Extinguishers
- 1-Year Manufacturer’s Warranty
- Stored Pressure Design
- Dependable Drawn-Steel Cylinders
- Durable High-Gloss Polyester Powder Paint
- All-Metal Valve Construction
- Temperature Range -65°F to 120°F
- Maximum Visibility During Discharge
- Large Loop Pull Pin
- No Electrical Conductivity Back to the Operator
- No Thermal or Static Shock
- QR Coded and Bilingual Labels
- Leaves No Residue
- Reclaimed Halon 1211 is Restored to Original Military Specification
- Uses All Recycled Gas in Accordance With The Montreal Protocol
- USCG Approved with Bracket Listed on UL Label (except model A344T)
- Chrome Cylinders
- Recycled gaseous agent certified to meet military specifications.
CLICK HERE TO REQUEST INFORMATION, SERVICE, TRAINING OR A QUOTE or call Jasperwood Fire Equipment Company in Amarillo TX at (806) 373-0000, in Lubbock TX at (806) 793-3000 or in Plainview TX at (806) 296-9789.
In AMEREX Carbon Dioxide Handheld Portable Fire Extinguishers the carbon dioxide is discharged as a white cloud of “snow” which smothers a fire by eliminating oxygen. It is effective for Class B flammable liquids and is electrically non-conductive. Carbon Dioxide is a clean, non-contaminating, odorless gas.
Features of AMEREX Carbon Dioxide Handheld Portable Fire Extinguishers
- 5-Year Manufacturer’s Warranty
- All-Metal Valve Construction
- Rust-Free Aluminum Cylinders
- Durable High-Gloss Polyester Powder Paint
- Temperature Range -22°F to 120°F
- Meets Many Hospital Medical Equipment Requirements
- Large Loop Stainless Steel Pull Pin
- Model 322NM is Independently Tested and Approved for use in MRI Facilities to 11.7 Tesla
- Model 322NM has a Sanitary White Paint Finish (easy to clean)
- QR Coded and Bilingual Labels
- USCG Approved with Bracket Listed on UL Label
- Leaves No Residue
- Non-Magnetic model available (Model 322NM - Tested to 11.7 Tesla).
CLICK HERE TO REQUEST INFORMATION, SERVICE, TRAINING OR A QUOTE or call Jasperwood Fire Equipment Company in Amarillo TX at (806) 373-0000, in Lubbock TX at (806) 793-3000 or in Plainview TX at (806) 296-9789.
AMEREX Class D Handheld Portable Fire Extinguishers include the AMEREX “soft flow” extension applicator which is particularly suited for fighting Class D fires. It allows the operator to stand away from the extreme heat and toxic fumes caused by burning material. The easily controlled, even discharge provides a non-dispersing application of the agent. The extension applicator may be quickly detached to provide a straight stream of chemical where greater range is required.
MODEL B570 contains a special blended Sodium Chloride-based dry powder extinguishing agent. Heat from the fire causes it to cake and form a crust excluding air and dissipating heat from burning metal. Metal fires involving magnesium, sodium, potassium, and sodium-potassium alloys can be successfully extinguished with this extinguisher. There is data showing that zirconium, uranium, titanium, and powdered aluminum fires can be controlled and extinguished with this unique extinguisher. Available in 150-lb. Wheeled Extinguisher
MODEL B571 contains a copper extinguishing agent specially developed by the U.S. Navy for fighting lithium and lithium alloy fires. The copper compound smothers the fire and provides an excellent heat sink for dissipating heat. Copper powder has been found to be superior to all other known fire extinguishing agents for lithium metal fires. Not recommended for lithium-ion battery fires. Available in 250-lb. Wheeled Extinguisher.
Features of AMEREX Class D Handheld Portable Fire Extinguishers
- 6-Year Manufacturer’s Warranty
- Stored Pressure Design
- Dependable Drawn-Steel Cylinders
- Special Corrosion-Resistant Yellow Paint
- Class D Color-Coded Paint Finish
- All-Metal Valve Construction
- Temperature Range -40°F to 120°F
- Unique “Soft Flow” Extension Applicator Plus Built-In Long-Range Nozzle
- Large Loop Stainless-Steel Pull Pin
- QR Coded and Bilingual Labels
- MODEL 859 Dolly Cart provides for easy transport
- For Combustible Metal Fires
CLICK HERE TO REQUEST INFORMATION, SERVICE, TRAINING OR A QUOTE or call Jasperwood Fire Equipment Company in Amarillo TX at (806) 373-0000, in Lubbock TX at (806) 793-3000 or in Plainview TX at (806) 296-9789.
AMEREX ABC or Multi-purpose Dry Chemical Handheld Portable Fire Extinguishers utilize a specially fluidized and siliconized mono ammonium phosphate dry chemical. It chemically insulates Class A fires by melting at approximately 350°F and coats the surface to which it is applied. It smothers and breaks the chain reaction of Class B fires and will not conduct electricity back to the operator.
Features of AMEREX ABC Dry Chemical Handheld Portable Fire Extinguishers
- 6-Year Manufacturer’s Warranty
- Stored Pressure Design
- Dependable Drawn-Steel Cylinders
- Durable High-Gloss Polyester Powder Paint
- All-Metal Valve Construction Brass Valve-Heavy Duty
- Chrome-Plated Brass Valve Body
- Stainless-Steel Handle & Lever Aluminum Valve-Light to Medium Duty
- Anodized Aluminum Valve Body
- Anodized Aluminum Handle & Lever
- Temperature Range -65°F to 120°F
- Easy and Economical to Maintain and Service
- Large Loop Pull Pin
- QR Coded and Bilingual Labels
- USCG Approved with Bracket Listed on UL Label
- Chrome Cylinders
CLICK HERE TO REQUEST INFORMATION, SERVICE, TRAINING OR A QUOTE or call Jasperwood Fire Equipment Company in Amarillo TX at (806) 373-0000, in Lubbock TX at (806) 793-3000 or in Plainview TX at (806) 296-9789.
AMEREX Regular Dry Chemical Handheld Portable Fire Extinguishers contain a siliconized sodium bicarbonate based dry chemical with free flowing and non-caking additives. Economical Class B & C protection with lower initial cost and recharging. This chemical smothers fires in flammable liquids and pressurized gases and will not conduct electricity back to the operator.
Features of AMEREX Regular Dry Chemical Handheld Portable Fire Extinguishers
- 6-Year Manufacturer’s Warranty
- Stored Pressure Design
- Dependable Drawn-Steel Cylinders
- Durable High-Gloss Polyester Powder Paint
- All Metal Valve Construction Brass Valve-Heavy Duty
- Chrome-Plated Brass Valve Body
- Stainless-Steel Handle & Lever Aluminum Valve-Light to Medium Duty
- Anodized Aluminum Valve Body
- Anodized Aluminum Handle & Lever
- Temperature Range -65°F to 120°F
- Easy and Economical to Maintain and Service
- Large Loop Pull Pin
- QR Coded and Bilingual Labels
- USCG Approved with Bracket Listed on UL Label
- Chrome Cylinders
CLICK HERE TO REQUEST INFORMATION, SERVICE, TRAINING OR A QUOTE or call Jasperwood Fire Equipment Company in Amarillo TX at (806) 373-0000, in Lubbock TX at (806) 793-3000 or in Plainview TX at (806) 296-9789.
AMEREX Purple K Dry Chemical Handheld Portable Fire Extinguishers contain specially fluidized and siliconized potassium bicarbonate dry chemical which is particularly effective on Class B flammable liquids and pressurized gases. It is electrically non-conductive. Purple K has been the choice of oil, gas, chemical and utilities industries as the preferred fire-fighting agent.
Features of AMEREX Purple K Dry Chemical Handheld Portable Fire Extinguishers
- 6-Year Manufacturer’s Warranty
- Stored Pressure Design
- Dependable Drawn-Steel Cylinders
- Durable High-Gloss Polyester Powder Paint
- All-Metal Valve Construction Brass Valve-Heavy Duty
- Chrome-Plated Brass Valve Body
- Stainless-Steel Handle & Lever Aluminum Valve-Light to Medium Duty
- Anodized Aluminum Valve Body
- Anodized Aluminum Handle & Lever
- Temperature Range -65°F to 120°F
- Easy and Economical to Maintain and Service
- Large Loop Pull Pin
- QR Coded and Bilingual Labels
- USCG Approved with Bracket Listed on UL Label
- Chrome Cylinders
CLICK HERE TO REQUEST INFORMATION, SERVICE, TRAINING OR A QUOTE or call Jasperwood Fire Equipment Company in Amarillo TX at (806) 373-0000, in Lubbock TX at (806) 793-3000 or in Plainview TX at (806) 296-9789.
AMEREX Z-Series High Performance Handheld Portable Fire Extinguishers are the ultimate choice in fire extinguishers for high hazard, frequent use, and extreme environment applications. Economical-less initial cost, lower maintenance costs, and greater reliability than cartridge-operated extinguishers. AMEREX Z-Series extinguishers are available with a proprietary, zinc-enriched coating that resists corrosion for up to 12 years in severely salt contaminated environments.
Features of AMEREX Z-Series High Performance Handheld Portable Fire Extinguishers
- 12-Year Manufacturer’s Warranty
- Zinc-Enriched Coating
- All-Metal Valve Construction
- Gauge Guards are Chrome-Plated Brass
- Protective Rubber Foot Rings
- Superior Range (Vertical & Horizontal)
- High (240 PSI) Operating Pressure
- Temperature Range -65°F to 120°F
- Wide Grip Allows Clearance for Gloved Hand
- Large Loop Stainless-Steel Pull Pin
- QR Coded and Bilingual Labels
- ABC Multi Purpose, Purple K
- High Flow Rate
- Fast Discharge
- Quicker Knockdown
- More Operator Protection
- USCG Approved with Bracket Listed on UL Label
- Hot dip galvanized USCG brackets available
- Long Range
- Highest UL Ratings
- Available in 125 and 250 pound wheeled extinguishers
- Affordable and easy to maintain.
CLICK HERE TO REQUEST INFORMATION, SERVICE, TRAINING OR A QUOTE or call Jasperwood Fire Equipment Company in Amarillo TX at (806) 373-0000, in Lubbock TX at (806) 793-3000 or in Plainview TX at (806) 296-9789.
AMEREX High Flow Dry Chemical Handheld Portable Fire Extinguishers for applications where discharge rates exceeding one pound per second are required as specified in NFPA 10. These extinguishers utilize the same hardware and are manufactured to the same UL specifications as AMEREX compliance-rated products.
Features of AMEREX High Flow Dry Chemical Handheld Portable Fire Extinguishers
- 6-Year Manufacturer’s Warranty
- Stored Pressure Design
- Dependable Drawn-Steel Cylinders
- Durable High-Gloss Polyester Powder Paint
- All-Metal Valve Construction Brass Valve-Heavy Duty
- Chrome-Plated Brass Valve Body
- Stainless-Steel Handle & Lever
- Twice the Flow Rate of Standard Models
- Meets DOT Requirements
- Temperature Range -65°F to 120°F
- Easy and Economical to Maintain and Service
- Large Loop Pull Pin
- QR Coded and Bilingual Labels
- USCG Approved with Bracket Listed on UL Label
- ABC, Regular, or Purple K Chemical
- HIGH FLOW–Exceeds 1 lb. per second discharge rate